One-Touch Open Sun/Moon Roof - Modification Instructions

[chyllintsx]

Originally Posted by Peregrine

TSX is made in Japan, TL is domesticated
- reason enough for me to stick with the TSX.

dat 2

[Peregrine]

Here's a little more advanced version of the original diagram. This works a little more like the driver's window with 1-touch-open feature. There's one more relay added to the diagram, that pressing "close" or "tilt" buttons while the 528T relay is opening the roof makes it disconnect power to the 528T relay, in theory, resetting it. In theory, because I don't have it to test it. But as every other device I've seen, if the power is disconnected, it will reset. So in lame terms, the way this should work is: If you press the "open" button, the roof will start opening for the pre-programmed amount of seconds. At any time during that action, if you press the "close" or "tilt" buttons, the roof will stop opening. And if you continue to hold the "close" or "tilt" buttons, it will start closing or tilting (tilting only works depending on appropriate position of the roof, so if it's closed or slightly tilted, it will continue to tilt as long as you hold the "tilt" button, but if the roof is slightly open, it will, of course, not tilt).

[BigballinTSX]

Originally Posted by Peregrine

Here's a little more advanced version of the original diagram. This works a little more like the driver's window with 1-touch-open feature. There's one more relay added to the diagram, that pressing "close" or "tilt" buttons while the 528T relay is opening the roof makes it disconnect power to the 528T relay, in theory, resetting it. In theory, because I don't have it to test it. But as every other device I've seen, if the power is disconnected, it will reset. So in lame terms, the way this should work is: If you press the "open" button, the roof will start opening for the pre-programmed amount of seconds. At any time during that action, if you press the "close" or "tilt" buttons, the roof will stop opening. And if you continue to hold the "close" or "tilt" buttons, it will start closing or tilting (tilting only works depending on appropriate position of the roof, so if it's closed or slightly tilted, it will continue to tilt as long as you hold the "tilt" button, but if the roof is slightly open, it will, of course, not tilt).
[IMG]

i wish i was brave enough to attept this... shit it looks like so much fun!

[Peregrine]

An easier method to install one-touch sunroof control has been introduced by KP technologies and their Honda/Acura "One Touch" Sunroof Controller

[rayd]

ok i have wired up the second diagram you made , just waiting for enough time to install it...

i hope it works!