|
|
Welcome to TSXClub.com.
You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, join TSXClub.com today!
|
02-10-2008, 05:42 PM
|
#1 (permalink)
|
|
Registered Member
|
Throttle Body Spacer
Is this a good mod to do its inexpensive just wondering if anyone has done it and if is reccomended
__________________
04 TSX PWP AT
Fujita CAI, TB Coolant Bypass, Hondata IMG, P2R TB Spacer & Gaskets
98 Camaro Z28 M6
Intake, Headers, 4.10 Gears, Ram Air, Intake Manifold
|
|
|
02-10-2008, 05:49 PM
|
#2 (permalink)
|
|
reflash before i die plz
|
i ordered the spacer and gaskets, but haven't gotten them yet (gaskets still being worked on).
from what i've read, this mod is inexpensive and helps in adding some low-end torque, and even some hp. there is one for the TL, and a lot of TL owners have mentioned that they can feel a difference.
|
|
|
02-10-2008, 05:50 PM
|
#3 (permalink)
|
|
Registered Member
|
It will work with a cai right
__________________
04 TSX PWP AT
Fujita CAI, TB Coolant Bypass, Hondata IMG, P2R TB Spacer & Gaskets
98 Camaro Z28 M6
Intake, Headers, 4.10 Gears, Ram Air, Intake Manifold
|
|
|
02-10-2008, 06:49 PM
|
#4 (permalink)
|
 Moderator Marketplace
Location: Palm Beach Gardens FL/Randolph NJ
|
You sig says 04 TSX. they make them for 2006+ However there is a way for you to do it.
__________________
Cheap Stuff: Intake resonator removed, Blackout all chrome, Painted hood trim, M3 trunk lip, Lamin-X
Not really cheap: JDM Outer Tails =), Brembo Blanks, Hawk HPS pads, iSimple, SPC camber kits (front and rear), PW:JDM fogs
Palm Beach Hot Rods
561-296-6668 From Fords to Ferarris
Speed-Theory 973-227-2119
^Honda shop in Fairfield NJ
|
|
|
02-10-2008, 07:43 PM
|
#5 (permalink)
|
|
Not A MOD3RATOR
My Ride: 2005 Acura TSX 5AT
|
The spacer will be a little bigger than your TB, cause you have a 04/05 TSX.
The spacer/gasket itself is NOT expensive, however, the gain will be very minimal. The TL guys get great gains thru Intake Plenum; not TB Spacer/gasket, gains of 3-4hp is really nothing. Without replacing the most restrictive parts I/H/E, I will say the gain will be minimal, to non-noticable.
__________________
PERFORMANCE: Injen l DC Sports l Magnaflow l Greddy l UR l Sun Automobile l P2R l BPi l 06 IM+TB @ 71mm l
HANDLING: Cusco l Progress l Eibach l BuddyClub l
BRAKE: RacingBrake l Hawks l Motul
EXTERIOR: MUGEN l WEDS l Yokohama
|
|
|
02-10-2008, 08:45 PM
|
#6 (permalink)
|
 Moderator Marketplace
Location: Palm Beach Gardens FL/Randolph NJ
|
I think you need a 04 Civic TB spacer
__________________
Cheap Stuff: Intake resonator removed, Blackout all chrome, Painted hood trim, M3 trunk lip, Lamin-X
Not really cheap: JDM Outer Tails =), Brembo Blanks, Hawk HPS pads, iSimple, SPC camber kits (front and rear), PW:JDM fogs
Palm Beach Hot Rods
561-296-6668 From Fords to Ferarris
Speed-Theory 973-227-2119
^Honda shop in Fairfield NJ
|
|
|
02-11-2008, 12:00 AM
|
#7 (permalink)
|
|
Not A MOD3RATOR
My Ride: 2005 Acura TSX 5AT
|
Quote:
|
Originally Posted by Pacemaker_Guy
I think you need a 04 Civic TB spacer
|
The 04 Civic TB Spacer MIGHT NOT fit simply due to their design, you will need to verify on it. However, the 06 Civic TB spacer WILL FIT, due to their same bolt pattern. The 06 Civic TB Spacer is only 4mm larger than the stock 04 TSX TB; a simply fix is to maxbore your 04 TB, which increase the airflow as well.
__________________
PERFORMANCE: Injen l DC Sports l Magnaflow l Greddy l UR l Sun Automobile l P2R l BPi l 06 IM+TB @ 71mm l
HANDLING: Cusco l Progress l Eibach l BuddyClub l
BRAKE: RacingBrake l Hawks l Motul
EXTERIOR: MUGEN l WEDS l Yokohama
|
|
|
02-14-2008, 12:45 AM
|
#8 (permalink)
|
|
Registered Member
|
Thanks man
__________________
04 TSX PWP AT
Fujita CAI, TB Coolant Bypass, Hondata IMG, P2R TB Spacer & Gaskets
98 Camaro Z28 M6
Intake, Headers, 4.10 Gears, Ram Air, Intake Manifold
|
|
|
| Thread Tools |
|
|
| Display Modes |
Linear Mode
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is On
|
|
|
All times are GMT -4. The time now is 04:15 PM.
|