Injen Intakes

gene112601 · 10-11-2009, 02:21 AM

Hi Guys here is some quick Questions

my car is 06 TSX and recently found 2 part numbers from Injen

RD1430

SP1431

witch one is the right part # for my year ? cuz looks like almost same pieces of the pipe just dont see any MR decals on RD model... thx very much guys

aznboi0204 · 10-11-2009, 02:34 AM

Quote:

Originally Posted by gene112601

Hi Guys here is some quick Questions

my car is 06 TSX and recently found 2 part numbers from Injen

RD1430

SP1431

witch one is the right part # for my year ? cuz looks like almost same pieces of the pipe just dont see any MR decals on RD model... thx very much guys

To tell you the truth, an intake is just a pipe with a filter that replaces your airbox. I didn't look at those 2 part numbers but if it fits then it should work. I have an 06 CGP TSX and I fitted a SRI that was supposed to be for 04-05s. Shouldn't worry about it that much imo.

gene112601 · 10-11-2009, 02:37 AM

Quote:

Originally Posted by aznboi0204

To tell you the truth, an intake is just a pipe with a filter that replaces your airbox. I didn't look at those 2 part numbers but if it fits then it should work. I have an 06 CGP TSX and I fitted a SRI that was supposed to be for 04-05s. Shouldn't worry about it that much imo.

ty for your great awnser just wondering injen provide a +10 Horsepower gain +8.1 Torque Gain on MR Version is this will afect on non MR version also ? and what is the benefit on the MR ? thx again

tsx4life · 10-11-2009, 03:10 AM

Quote:

Originally Posted by gene112601

Hi Guys here is some quick Questions

my car is 06 TSX and recently found 2 part numbers from Injen

RD1430

SP1431

witch one is the right part # for my year ? cuz looks like almost same pieces of the pipe just dont see any MR decals on RD model... thx very much guys

sp1431...... also where r u getting you sources from?.....where u planing to get it from?...goodluck

mclovintsx · 10-11-2009, 04:18 AM

those numbers given by injen are different to real gains. With injen intakes, you'll lose low end but gain high end. RD versions will fit fine with 04-05's but will have some fitment issues with 06-08's. SP versions will fit fine with 06-08's. At least that's what I've heard. Don't quote me on it.

gene112601 · 10-11-2009, 04:37 AM

Quote:

Originally Posted by tsx4life

sp1431...... also where r u getting you sources from?.....where u planing to get it from?...goodluck

one of my friend got that RD never used
i have some friend who sells perfomance parts locally thx !

gene112601 · 10-11-2009, 04:38 AM

Quote:

Originally Posted by mclovintsx

those numbers given by injen are different to real gains. With injen intakes, you'll lose low end but gain high end. RD versions will fit fine with 04-05's but will have some fitment issues with 06-08's. SP versions will fit fine with 06-08's. At least that's what I've heard. Don't quote me on it.

yeah i know those ares from injen and those are not real gains

thx very much on ur awnser

aznboi0204 · 10-11-2009, 03:58 PM

Quote:

Originally Posted by gene112601

ty for your great awnser just wondering injen provide a +10 Horsepower gain +8.1 Torque Gain on MR Version is this will afect on non MR version also ? and what is the benefit on the MR ? thx again

I personally don't know bout the differences. Other people mentioned the differences above but when I put the SRI on, I didn't feel much gain at all. Those numbers are probably their highest gains that they recorded so I wouldn't really trust the numbers unless I see a before and after dyno chart. SRI give you better low end, Comptech Icebox gives you good midrange without the noise, and CAI gives you top end but you lose low end. Those are some other choices as well.

juri · 10-11-2009, 04:54 PM

both will fit. I have a 07, got a Injen Cold Air RD Series Race Division Intake Systems, Polished, 2004-08 TSX w/MR Technology- Converts to Short Ram, SP1431P from Heeltoe. I think there is a misprint because on the box its a SP1431 MR tech. It fits all years of TSX, not a big difference in power, little gains no losses, but its more responsive all around and sounds pissed off.

gene112601 · 10-11-2009, 05:57 PM

Quote:

Originally Posted by juri

both will fit. I have a 07, got a Injen Cold Air RD Series Race Division Intake Systems, Polished, 2004-08 TSX w/MR Technology- Converts to Short Ram, SP1431P from Heeltoe. I think there is a misprint because on the box its a SP1431 MR tech. It fits all years of TSX, not a big difference in power, little gains no losses, but its more responsive all around and sounds pissed off.

thx for your awnser
i got the RD Intake Kit on my hand but i changed my mind got stock intake modified with K&N Dropin filter + Intake Resonator removed + maded some copy of Comptech System work pretty good on me... so the RD kit will be for sale asap thx again for all your help and awnsers
i might save up for K-Pro , Camshafts , Camgears , Headers...

juri · 10-11-2009, 06:34 PM

I wish! Unfortunately K-pro is not out for our 07 yet, I think. But Cams, camgears, would be sweet maybe some Crower Stainless Steel Valves, Crower Valve Springs & Titanium Retainers

Good luck, let me know how it works out.

gene112601 · 10-13-2009, 09:38 PM

Quote:

Originally Posted by juri

I wish! Unfortunately K-pro is not out for our 07 yet, I think. But Cams, camgears, would be sweet maybe some Crower Stainless Steel Valves, Crower Valve Springs & Titanium Retainers

Good luck, let me know how it works out.

sure i will but ill take some time till end