Forums Register Go Premium FAQ Members List vBGarage Mark Forums Read


Go Back   TSXClub.com Forums > Performance > Engine / Transmission / Exhaust Systems > 1st Gen - Engine, ...
Reload this Page Help!! defi vsd concept install

Welcome to TSXClub.com!
Welcome to TSXClub.com.

You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, join TSXClub.com today!


Reply
 
LinkBack Thread Tools Display Modes
Old 11-04-2005, 05:58 PM   #1 (permalink)
Registered Member
 
Join Date: Nov 2005
My Ride: honda/tsx/04
Posts: 6
advan048 is neutral and has a clean balanced record.
iTrader: (0)
Help!! defi vsd concept install
hi there, i'm trying to install the defi vsd concept to my 04tsx, but i can't find the speed wire from ecu, can u guys help me out!!thanks!!
advan048 is offline   Reply With Quote
Old 11-04-2005, 06:08 PM   #2 (permalink)
2005 TSX 6MT Nav
 
spyguy's Avatar
 
Join Date: Jan 2005
Location: Little Neck, NY
My Ride: 2005 TSX 6MT Nav
Posts: 692
spyguy has a slight shameless behaviour in his/her past.
iTrader: (0)
what does this VSD concept display exactly?
__________________
2005 NBP 6MT w/Nav Ebny interior
-injen CAI
-Comptech short shifter
-Skunk2 shift knob
-Tein Super Street coilovers
-Ingall rear camber kit
-A-SPEC body kit
-progress rear sway
-Comptech front strut
-powerslot rotors
-hawk HPS pads
spyguy is offline   Reply With Quote
Old 11-04-2005, 06:31 PM   #3 (permalink)
Staff: Rank 1
Administrator
Technical & Staff Operations
 
Peregrine's Avatar
 
Join Date: Jun 2005
Location: Northern NJ
My Ride: '04 TSX - SSM
Posts: 5,916
Peregrine is a priceless value of the forum, and commands true dignified respect.Peregrine is a priceless value of the forum, and commands true dignified respect.Peregrine is a priceless value of the forum, and commands true dignified respect.Peregrine is a priceless value of the forum, and commands true dignified respect.Peregrine is a priceless value of the forum, and commands true dignified respect.Peregrine is a priceless value of the forum, and commands true dignified respect.Peregrine is a priceless value of the forum, and commands true dignified respect.Peregrine is a priceless value of the forum, and commands true dignified respect.Peregrine is a priceless value of the forum, and commands true dignified respect.Peregrine is a priceless value of the forum, and commands true dignified respect.Peregrine is a priceless value of the forum, and commands true dignified respect.
iTrader: (2)
I can tell you where the tach signal wire on 04 TSX is
__________________
Peregrine is offline   Reply With Quote
Old 11-04-2005, 06:51 PM   #4 (permalink)
Donating TSXCLUB Member
 
dontcare4urshyt's Avatar
 
Join Date: May 2005
Location: West Islip, New York
My Ride: Acura/TSX/2005
Posts: 247
dontcare4urshyt is neutral and has a clean balanced record.
iTrader: (0)
umm is the gauge cluster too far?
__________________
my car has more miles than yours!!
dontcare4urshyt is offline   Reply With Quote
Old 11-05-2005, 01:01 PM   #5 (permalink)
Registered Member
 
Join Date: Nov 2005
My Ride: honda/tsx/04
Posts: 6
advan048 is neutral and has a clean balanced record.
iTrader: (0)
yes, the gauge cluster is too far, and i look at the serive manual that suppose have this wire in ecu, but when i check my ecu it's empty in that spot..
advan048 is offline   Reply With Quote
Old 11-05-2005, 11:40 PM   #6 (permalink)
TSX of the Month Winner
TOTM 2006
 
JeffTSX's Avatar
 
Join Date: Jan 2004
Location: Toronto, Ont
My Ride: 04 Pearl White TSX 6spd
Posts: 669
JeffTSX is neutral and has a clean balanced record.
iTrader: (0)
Quote:
Originally Posted by Peregrine
I can tell you where the tach signal wire on 04 TSX is
Okay can you tell me then? Cause I've flipped through the service manaul and I can't seem to find the "wire" but I can only locate the "cluster unit". I've been trying to install a Stwert Warner shift light for a while now.
__________________

That's some good sh*t!!!
JeffTSX is offline   Reply With Quote
Old 11-07-2005, 01:11 AM   #7 (permalink)
Staff: Rank 1
Administrator
Technical & Staff Operations
 
Peregrine's Avatar
 
Join Date: Jun 2005
Location: Northern NJ
My Ride: '04 TSX - SSM
Posts: 5,916
Peregrine is a priceless value of the forum, and commands true dignified respect.Peregrine is a priceless value of the forum, and commands true dignified respect.Peregrine is a priceless value of the forum, and commands true dignified respect.Peregrine is a priceless value of the forum, and commands true dignified respect.Peregrine is a priceless value of the forum, and commands true dignified respect.Peregrine is a priceless value of the forum, and commands true dignified respect.Peregrine is a priceless value of the forum, and commands true dignified respect.Peregrine is a priceless value of the forum, and commands true dignified respect.Peregrine is a priceless value of the forum, and commands true dignified respect.Peregrine is a priceless value of the forum, and commands true dignified respect.Peregrine is a priceless value of the forum, and commands true dignified respect.
iTrader: (2)
Quote:
Originally Posted by JeffTSX
Okay can you tell me then? Cause I've flipped through the service manaul and I can't seem to find the "wire" but I can only locate the "cluster unit". I've been trying to install a Stwert Warner shift light for a while now.
The Tachometer wire is BLUE (AC) at ECM/PCM located on front of the transmission tunnel (close to the firewall). The connectors are on passenger side. The tach wire is in the white 31 pin connector E, pin 25.
I can vouch for that because I used that location myself. It's kind of hard to get to. I had to move the carpet away from the area, then dig to find that connector, disconnect it, find the wire and then solder into it (I tested it while it was connected, of course), then I could plug it back in. If you're going to use a wire connector instead of soldering, you may not need to unplug it.

I also have some info on the Speed sense wire, but this I never tested:
BLUE/WHITE (AC) at PCM module in front of center console under dash.

Good luck
Peregrine is offline   Reply With Quote
Old 11-07-2005, 08:18 AM   #8 (permalink)
yf1
Registered Member
 
yf1's Avatar
 
Join Date: Dec 2003
Location: Melbourne Australia
My Ride: Accord Euro 2004
Posts: 48
yf1 is neutral and has a clean balanced record.
iTrader: (0)
Quote:
Originally Posted by advan048
hi there, i'm trying to install the defi vsd concept to my 04tsx, but i can't find the speed wire from ecu, can u guys help me out!!thanks!!
Now I can't vouch this is definately the write pin outs for the TSX - this is the diagram I used for the APEXI RSM on the K2 4 Accord Euro CL9 in Australia.

http://www.ozhonda.com/forum/showthr...exi+rsm+wiring
__________________
Euro 6mt / Prodrive 17" GCO7C / Dunlop 235 3000As / Rays and McGuard lock nuts / Comptech Icebox / ITG Racing filter / Whiteline Sway Bar / Cusco Strut Brace / DC5R shifter / Apexi RSM / Honda A-SPEC suspension / Euro R Body Kit
yf1 is offline   Reply With Quote
Old 11-07-2005, 09:24 AM   #9 (permalink)
Staff: Rank 1
Administrator
Technical & Staff Operations
 
Peregrine's Avatar
 
Join Date: Jun 2005
Location: Northern NJ
My Ride: '04 TSX - SSM
Posts: 5,916
Peregrine is a priceless value of the forum, and commands true dignified respect.Peregrine is a priceless value of the forum, and commands true dignified respect.Peregrine is a priceless value of the forum, and commands true dignified respect.Peregrine is a priceless value of the forum, and commands true dignified respect.Peregrine is a priceless value of the forum, and commands true dignified respect.Peregrine is a priceless value of the forum, and commands true dignified respect.Peregrine is a priceless value of the forum, and commands true dignified respect.Peregrine is a priceless value of the forum, and commands true dignified respect.Peregrine is a priceless value of the forum, and commands true dignified respect.Peregrine is a priceless value of the forum, and commands true dignified respect.Peregrine is a priceless value of the forum, and commands true dignified respect.
iTrader: (2)
All right, so from this ECU diagram for CL9 it looks like the speed wire is in pin 26 of the same 31 pin connector as the tach wire.
Last edited by Peregrine; 11-07-2005 at 09:28 AM.
Peregrine is offline   Reply With Quote
Reply

Bookmarks

« Previous Thread | Next Thread »
Thread Tools
Display Modes
Linear Mode Linear Mode

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On

CarNews.NET your car news portal

All times are GMT -4. The time now is 03:18 PM.

Powered by vBulletin® Version 3.7.3
Copyright ©2000 - 2009, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.3.0 RC2
vB.Sponsors 		Contact Us - TSXClub.com - Archive - Privacy Statement - Top